pre liminary data sheet | october 28 , 2007 1 of 6 for more information on this and other products: contact sales at emcore 626-293-3400, or visit www.emcore.com. applications high performance supertrunking links high power distribution networks redundant ring architectures fttx networks features full functionality 1 ru edfa low noise figure (typ < 5.5db ) total input power range: C10 dbm to +12 dbm +14 dbm to +30 dbm output power optional internal optical power splitters standard rs-232 communication key lock switch standard and optional gain flatness (1530nm - 1562nm) vfd panel status indicator low electrical power consumption input / output isolation > 40/40 db polarization dependant gain < 0.1 db polarization mode dispersion < 0.5 ps the ortel pona 2100 series erbium doped fiber amplifier (edfa) is an ideal building block for oem system integrators. the family of pona 2100 series edfas is designed to meet the most demanding noise performance requirements of catv applications, and performs all the functions required of an optical amplifier for system integration. pona 2100 series edfas provide optical isolation on the input and output of the gain block for stable, low noise operation. the input and output optical signal power levels are detected for monitoring and control. the input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode. the pona 2100 series edfas also provide monitors and associated alarms for all vital characteristics. the optical output of the pona 2100 series edfas can be split into multiple ports by an optional external splitter. pona 2100 series erbium doped fiber amplifier
pre liminary data sheet | october 28 , 2007 2 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation pona 2100series edfa optical / electrical characteristics property symbol (units) limit pona models comments product code 2114 2117 2120 2122 2124 2127 2130 performance (note 1) operating input power pin (dbm) max +12 +12 +12 +12 +12 +12 +12 operating input power pin (dbm) min -10 -10 -10 -10 -10 -10 -10 typical (may vary for some models) 14.0 17.0 20.0 22.0 24.0 27.0 30.0 output power po (dbm) +/-.25 +/- .25 +/- .25 +/- .25 +/- .25 +/- .25 +/- .25 (note 2) noise figure nf (db) typ/max 4.5/5.0 4.5/5.0 4.5/5.0 4.5/5.0 5.0/5.5 5.0/5.5 5.5/6.0 (notes 3, 8) static gain flatness gf (db) max +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 (note 7) (note 4) dynamic gain flatness (db) max +/-1 +/-1.25 +/-1.5 +/-2.0 +/-2.0 +/-2.0 (note 7) (notes 5, 8) output power stability (db) max +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 (note 6) power consumption (steady state regime) psys (w) max 5 7 9 12 20 35 40 50 o c case notes : 1) unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges 2) measurement variations 3) measured with 8 evenly spread input optical signals @ 25c, pin 0 dbm (measuring with 1 input optical signal with pin 0 dbm and l 1550 nm is also possible. (low noise figure options with nf 4.0/4.5 db are available for some models) 4) measured with a swept probe signal (pp), where pp 0 dbm @ 25 c 5) measured with a swept probe signal (pp), and a fixed tone signal (pt) @ ~ 1550 nm; (pt pp+20 db; pt + pp 0 dbm) @ 25 c; gain flattened options with g +/-0.75db or g +/-1.0db are available (for some models) 6) over polarization and temperature 7) static and dynamic gain flatness for pona 2130 can be defined for 1545 nm l 1562 nm and by special request only. (please contact your sales representative) 8) specific nf and g can be guaranteed at a single specified input optical power level (pin = pt + pp) different from 0 dbm. (please contact your sales representative for more information) general and mechanical specifications property requirement comments general pona 2114 C pona2127 pona 2130 operating wavelength 1530 ~ 1562 nm 1545 ~ 1562 nm standard standard operating case temperature -10 c to 55 c standard storage temperature -40 c to 85 c standard operating humidity 20% to 85% non-condensing voltage supply range 100 vac to 240 vac 50/60 hz -36 to C60 v dc standard optional optical connectors sc/apc; sc/upc; fc/apc; fc/upc; e2000/apc user specified dimensions in inches 19.0w x 14.76d x 1.72h 19 rack mounted, 1u
3 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation preliminary data sh eet | october 28 , 2007 pona 2100 series edfa outline drawing dc & ac versions shown below with 8 output port option
4 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation preliminary data sh eet | october 28 , 2007 pona 2100 series edfa compliance information 89/336/eec electromagnetic compatibility directive, amended by 92/31/eec & 93/68/eec 73/23/eec low voltage directive, amended by 93/68/eec en 50083-2, (2001) cable networks for tv signals, sounds and interactive services, part 2 electromagnetic compatibility for equipment. en 55013 mains conducted emissions en 61000-3-2 mains frequency and its harmonics, conducted emissions en 55020 radiation from active equipment, radiated immunity en 61000-4-6 immunity of active equipment, radiated immunity en 61000-4-3 immunity of active equipment, radiated immunity en 61000-4-2 electrostatic discharge immunity en 61000-4-4 electrical fast transient / burst immunity en 60950 low voltage directives en 60825-1 laser safety requirement en 60825-2 laser safety requirement cdrh laser safety requirement
5 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation preliminary data sh eet | october 28 , 2007 pona 2100 series edfa laser safety information this product meets the applicable requirements of 21 cfr 1010 & 1040 and is classified as a class iv laser product based on the maximum optical output power shown below. during use as intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiation and would meet the requirements for a class i laser product. the laser product report has been submitted to the cdrh and the accession number is expected by october 2006. wavelength = 1530 ~ 1561 nm (dependant on input source) maximum output power = 1.0 w (single output, 30 dbm model)
6 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation preliminary data sh eet | october 28 , 2007 pona 2100 series edfa ordering information pona 21 - - - - * optical output power output ports input voltage connector gff/ nf options 14 - 14 dbm 1 ac C 90-260v 50/60 hz sc - sc/apc (default option) 00 - standard 17 - 17 dbm 2 dc C 48 v fc - fc/apc (default option) 01 - gain flattened option 20 - 20 dbm 4 ec - e2000/apc 02 - low nf option tc - sc/upc 22 - 22 dbm 8 2dc C redundant 48 v gc - fc/upc 03 C gain flattened and low nf option 24 - 24 dbm 27 - 27 dbm 30 - 30 dbm * notes: 1. pona 2130 with one or two optical outputs and pona 2127 with one optical output will have special high power output optical connector(s) and bulkheads. 2. for ordering pona preamplifiers please contact your sales representative 3. only some models can be order with gain flattened and/or low nf options. (-01, -02, and C03 suffixes). please contact your sales representative for details for exact model number, please contact your sales representative. information contained herein is deemed to be reliable and accurate as of issue date. emcore reserves the right to change the design or specifications of the product at any time without notice. ortel, the ortel logo, emcore, and the emcore logo are trademarks of emcore corporation.
|
